Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Porsche 914 FI Air Intake System for 1.7 or 2.0
Posted by: JawjaPorsche Jan 26 2012, 01:57 PM
I know K & N does not make an air cleaner kit to replace the stock one. I did find one at 9X Auto.com
http://www.9xauto.com/media/04/a20791513482de5988b238_l.JPG
I have a 73 paper filter type and not the oil bath from earlier years.
Has anyone used this or know of an alternate vendor or source. Or maybe someone has made one using a K & N setup and modified it for their teener?
Attached image(s)
Posted by: SLITS Jan 26 2012, 02:57 PM
Don't let Cap'n Krusty see this thread ...................
Posted by: 2xs performance Jan 26 2012, 03:06 PM
They have the one you pictured on ebay for under $20. I didn't see it listed last week. I only seen the other metal one that costs over $200. I purchased the one pictured below off ebay for $15. It's for a jeep liberty. I figured one filter costs that so I can't go wrong even if I decide not to use. I havent felt good this week so havent went out to work on my car lately. And havent tried to put it on yet. I have to modify it to fit. But figured dual filters would look cool, and if it didn't I can always put the factory box back on and resell this one.
Attached image(s)
Posted by: Philip W. Jan 26 2012, 03:11 PM
They have the one you pictured on ebay for under $20. I didn't see it listed last week. I only seen the other metal one that costs over $200. I purchased the one pictured below off ebay for $15. It's for a jeep liberty. I figured one filter costs that so I can't go wrong even if I decide not to use. I havent felt good this week so havent went out to work on my car lately. And havent tried to put it on yet. I have to modify it to fit. But figured dual filters would look cool, and if it didn't I can always put the factory box back on and resell this one.
I put this on--- got it at the local autozone- probably cost me under $75 bucks for all the parts and filter, etc. - they don't have the reducer exactly like you would normally use, but i used a flexible reducer and clamp , seems to work fine...
Attached thumbnail(s)
Posted by: Tom_T Jan 26 2012, 05:06 PM
IIRC K&N still makes the replacement style rectangular K&N reusable high-flow filter which will fit right into the stock 2L airbox (last time I looked online anyway).
Posted by: underthetire Jan 26 2012, 05:11 PM
I made my own for ~ 40 bucks from autozone parts as well.
Posted by: Dave_Darling Jan 26 2012, 05:55 PM
There, fixed that for you.
I have direct experience with that, BTW.
--DD
Posted by: sean_v8_914 Jan 26 2012, 06:48 PM
HD racing sells everything you need to make that and Auto zone has teh filter for 15 bucks
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)