While doing some web surfing, I came across a few pages that mentioned using a Weber brand hydralic throwout bearing.
It seems for Jeeps it is a common upgrade when doing conversions, it's also used in some of the higher end Cobra kit cars.......
I'm guessing that these must be factory installed in some cars, but I cannot figure out by whom?????
thanks
Mike, there might be others as well, but I heard that there were some Ford Ranger pickups that used a hydraulic T.O. bearing.
-Ben M.
I believe 80's 90's jeep cherokees had them. Sold a few in my parts days, but can't remember 100% now. Call your local NAPA and ask the counter people. If they don't know call NAPA in Napa (where I worked) @ 707-252-6811. They know.
I'm fairly certain Tilton makes one too. The Tilton unit is called a annular TOB. I guess the critical part would be getting one that has the same diameter, the same "stroke", and the correct bellhousing to pressure plate finger height.
PK
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)