Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ heat exchanger questions

Posted by: Schnell944 Sep 9 2004, 11:26 AM

hey guys, i have a set of heat exchangers that i havent gotten around to using, and don't think i will. I cleaned them up a while ago, and they're in descent shape. obviously not concourse, but they're useable. first off, can anyone tell what years these can be used on? also, one appears to be longer than the other....is this correct. thirdly, how much are these guys worth? and lastly, does anyone here want them? thanks!
IPB Image

Posted by: Aaron Cox Sep 9 2004, 11:35 AM

they look like 2.0 h/e's off a 73-74

theyre not stainless right

Posted by: Schnell944 Sep 9 2004, 12:05 PM

they dont look to be stainless. what would be the difference in an old stainless set as opposed to an old steel one? more corrosion?

Posted by: lapuwali Sep 9 2004, 12:18 PM

One should be longer than the other. The cylinder banks are offset significantly, but the muffler connections are not.

Posted by: opera guy Sep 9 2004, 02:46 PM

QUOTE(Schnell944 @ Sep 9 2004, 10:05 AM)

they dont look to be stainless. what would be the difference in an old stainless set as opposed to an old steel one? more corrosion?

slap some motor oil on them, that will slow down the rusting

rust

Posted by: Schnell944 Sep 9 2004, 09:19 PM

value? anyone need them?

Posted by: Headrage Sep 9 2004, 09:46 PM

I have a set that you can have for free if you can replace the left clamshell. As long as you pay for transportation.

Posted by: vsg914 Sep 9 2004, 09:54 PM

can you shoot a pic of the muffler flanges next to each other?