Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Stainless Fuel lines
Posted by: ppetion Feb 28 2012, 10:41 PM
Can someone post a picture of these 2 lines mounted on the car, I seem to have trouble mounting them properly...
Posted by: jcambo7 Feb 28 2012, 10:44 PM
Hope this helps!
http://www.tangerineracing.com/stainlessFuelLines.htm
Posted by: Krieger Feb 28 2012, 10:48 PM
The curved part of those short lines go inside the engine compartment just below the battery.
Posted by: ppetion Feb 28 2012, 10:50 PM
Thanks all . I have a better idea.
Posted by: Racer Chris Feb 29 2012, 12:31 PM
QUOTE(Krieger @ Feb 28 2012, 11:48 PM) 
The curved part of those short lines go inside the engine compartment just below the battery.
Not really.
The curved part goes to the rear of the engine compartment. The straight part goes through the engine shelf a couple of inches, below the battery.
Posted by: ClayPerrine Feb 29 2012, 12:40 PM
QUOTE(Racer Chris @ Feb 29 2012, 12:31 PM)
QUOTE(Krieger @ Feb 28 2012, 11:48 PM)
The curved part of those short lines go inside the engine compartment just below the battery.
Not really.
The curved part goes to the rear of the engine compartment. The straight part goes through the engine shelf a couple of inches, below the battery.
Chris.. I mentioned it to Ed when he was in Kansas. It doesn't look like that when you look at the lines. It looks like they should go the other way. I installed a bunch of your kits with the lines the other way. It just works better.
Have you thought of putting in a set of installation directions with the kits?
Posted by: ppetion Feb 29 2012, 12:59 PM
QUOTE(ClayPerrine @ Feb 29 2012, 01:40 PM)
QUOTE(Racer Chris @ Feb 29 2012, 12:31 PM)
QUOTE(Krieger @ Feb 28 2012, 11:48 PM)
The curved part of those short lines go inside the engine compartment just below the battery.
Not really.
The curved part goes to the rear of the engine compartment. The straight part goes through the engine shelf a couple of inches, below the battery.
Chris.. I mentioned it to Ed when he was in Kansas. It doesn't look like that when you look at the lines. It looks like they should go the other way. I installed a bunch of your kits with the lines the other way. It just works better.
Have you thought of putting in a set of installation directions with the kits?
Any pics of your install?
Posted by: gothspeed Feb 29 2012, 03:54 PM
I need to get a tunnel pair of these asap!! 
Posted by: Racer Chris Feb 29 2012, 07:37 PM
QUOTE(ClayPerrine @ Feb 29 2012, 01:40 PM)
I installed a bunch of your kits with the lines the other way. It just works better.
Only for you Clay, only for you.
QUOTE
Have you thought of putting in a set of installation directions with the kits?
We ship a set of instructions with every set. Its not my responsibility to keep track of what people do to their instructions.
Posted by: ejm Feb 29 2012, 09:19 PM
QUOTE(ClayPerrine @ Feb 29 2012, 01:40 PM)
Chris.. I mentioned it to Ed when he was in Kansas. It doesn't look like that when you look at the lines. It looks like they should go the other way. I installed a bunch of your kits with the lines the other way.
We still chuckle about that
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)