Hi World !
I'm a newbie here - we picked up a '74 914 1.8 last week. Fun car so far! Really getting a kick out of it and fixing the little things with it (odometer, etc..) Many thanks to the tech articles and search engine on here!
Enjoying the nice weather, we took the car out for our first "fun" drive - so of course we took the top off. But we couldn't figure out how to store it in the trunk.
I see the clips near the engine bay, and at the rear, the rubber pads - just couldn't figure out which end goes where? Also doesn't help that the springs are not on the trunk - so someone has to hold the trunk up.
Can someone tell me specifically how to store the top in the trunk? Which end goes where?
Thanks!
Chris
(auto_cran)
Its not rocket science. The front goes to the front, and the rear goes to the rear. Easy
Some times you have to pivot the latches to fit into the cups in the trunk!
Thanks for the tips - got it. Had no idea the cups are there for the latches... Thanks for mentioning it, Jeff.
Definitely not rocket science, but I know better than to 'force' anything on a 38 year old car - and those white plastic tabs look like they could break easily if I forced the wrong end in there.
MikeC - thanks for the welcome. Before deciding to buy, I did some research(buyers guide check list) as well as read tons of posts on here. So far, the car checks out well. It's not perfect and there are some things that need fixing, which I have started to address. I'll have tons more questions, no doubt, but for now, the Search Engine is my right hand man!
Thanks Andy - once I heard about the cups for the latches, it all came together. The rear rubber clips on mine appear new.
Chris
(auto_cran)
Chris, glad to have you as a 914 owner/operator. Some members here have a skewed and/or warped sense of humor, all want to help, but once again, not everyone of us have the tools, know-how, time, or answers.
And, again
Paul
ya did your home work good for you ....and theres always something to put a wrench on there old hobby cars for sure...have fun
MikeC
Yeah--don't force it. Otherwise your trunk will look like many other 914s (including mine), with a tweaked rear hood (bent up in one or both corners).
and
I couldnt imagine putting the top in and out without trunk springs If you can do that, you are very skilled. lol
Open the engine bay and see if the springs are there, they are long metal wire looking things that are attached to the car right under the plastic cups described earlier in this thread.
If they are there, all you need is the roller wheel mounted to the top sides of the engine bay, sometimes this bolt is sheered off, sometimes the whole plate rips off. Most likely the reason the springs are not attached.
do a search here for trunk springs, there are a lot of threads how to fix or replace this problem, there is also a vendor here that sells a bolt on replacment.
Try this thread
http://www.914world.com/bbs2/index.php?showtopic=39320
Or just get the pneumatic lift kit from Camp Counselor Craig of CAMP914. (I don't remember if Pelican carries a lift kit, but lots of places do.) It takes some stress off of the rear trunk hinges, and means you never have to deal with those stinking torsion rods again!
(I got whacked by one of those torsion rods once, and won't ever forget it!)
--DD
Thanks for all the tips, everyone!
First off - I'll get some pics of the car soon. Rain is in the forecast for the next few days - next time I get the car out, I'll get some photos and display here or on a new thread.
I used a long extension pole to hold the trunk open - and after reading the tips you all supplied, I was able to get it in place (I just had to be super careful not to knock over the pole!).
As for the springs -I did some reading (again, the Search on here is GREAT!) and decided to go to the shocks. I already have the ones form Craig (CAMP914) on the way. During the rainy weekend, I hope to install them. Also picked up some odds & ends from Pelicans.
Thanks again - and I owe you all some pics!
Chris
(auto_cran)
who the hell is signed in under crandels[6freak aka mike c] user name and wtf did you do with him!!???
this warm and fuzzy shit is not crandel!!!!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)