Pulled my plugs the other day and it looks like the motor is running to lean( very white) I have a 73 2.0 with stock FI . k&N air filter and a kerry hunter exhust with a super trap with all discs in.
It has crane optical ignition and the motor has about 2500 miles on it. Is this normal for this motor ? if not what can I do ? it runs great! I use it for autocross and DE only. Please Help
Put it on a dyno to check the A/F with a load on it before doing anything.
Check the fuel filter too and what part number are on the MPS and ECU?
Geoff
MPS and ECU are correct. could fuel pressure cause it? its running about 34 pounds?
please help
I've got that problem also, I put colder plugs in just to see if it made any differance. It did but not enough. Going to have the MPS tuned by HPH. They want to do a few at once. So give them a call, I,m going to try to set up a time for my car. Your fuel pressure is a little high and that should help. Go to a colder pulg, if you can't get the pulgs to run a rich dark tan don't run it.
Joe
Got a date for my tune-up, Nov. 4th.It sounds sooo far away, but with all the work I have in my motor I'm not taking chances. This car should be my A/X car.
Joe
someone told me that if i take some plates/Discs out of my super trap that will help.does that sound right?
Yes it will Don't know how much but it should also up the low end torque.
Tim I would like to take you up on your offer (o2 sensor) I think I am going to try taking out some discs, to see if i feel a difference.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)