Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Wot. Any good Honda forums?

Posted by: underthetire Mar 10 2012, 07:12 PM

I need a little help. Pulled the throttle body off my kids civic, cleaned it, and went to re install it. The gasket flaps sold me was wrong, picked up the "other" possibility, and it was wrong as well. Both were way to small. Canadian car, so it might be the reason. I checked a couple forums and it seems like they were a bunch of kids that know very little other than bolting on "performance parts yo". Dealer didn't have one for me to go look at.

Posted by: Johny Blackstain Mar 10 2012, 07:15 PM

hard to believe but try ebay... lots of hot rod parts & gaskets for civics there. most of my civic is off of ebay... lol

Posted by: wingnut86 Mar 10 2012, 07:17 PM

PM Fasthonda on our site. He races his 914 with Honda motors, has lots of connections.

Posted by: biosurfer1 Mar 10 2012, 10:28 PM

Honda-tech is the one I use...unfortunately its a lot of the ricer fanboys too but its usually 3-4 good threads out of 10 which is sadly a good ratio for Honda sites.

Posted by: underthetire Mar 10 2012, 10:42 PM

Thanks, I'll check that out. Actually found out in a roundabout way, the fel pro stuff just doesn't fit. Big suprise. Rock auto has the victor reinz one that should work. It on its way.

Posted by: Andyrew Mar 10 2012, 11:00 PM

d-series.org if its a d-series.

Posted by: underthetire Mar 10 2012, 11:05 PM

Stupid question, how do I know what series it is? Engine is a d15b7, is that what they go by?

Posted by: Andyrew Mar 11 2012, 04:05 AM

So its a D series.

D = Single cam
B = Dual cam (for reference)

15 = 1.5L

B7 = Head model, AKA 102HP non vtec engine from a DX.

Enjoy! Thats a pretty stout engine, Not much to go wrong and lasts forever...