Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Pedal Cluster rebuild

Posted by: HarveyH Sep 21 2004, 08:02 PM

I"m getting set to rebuild the pedal cluster, and have a Weltmeister bronze bushing kit from the PO, probably about 10 years old. This kit has a spirol type pin rather than a roll pin. Was the problem in these kits only with the roll pin or did it include infreior quality spirol pins too?

Thanks
Harvey

Attached image(s)

Posted by: Brad Roberts Sep 21 2004, 09:46 PM

The Welt kits come with a Spirol. I have never seen a roll pin in the kits. I would imagine as we post/talk about the kits we referred to them as "roll pins" instead of by their proper name... and thus the confusion. Buy a Porsche roll pin/spirol and throw that one away. I shot some pics and showed the difference between a new Porsche pin and a Welt pin... dont know where that thread is.. and the pics are at the office.

B

Posted by: HarveyH Sep 22 2004, 06:43 AM

Thanks, I'll try and stop by the local dealer today.
Harvey

Posted by: Root_Werks Sep 22 2004, 08:02 AM

Hmm, a good reminder my brake pedal sticks a little and I should rebuild my pedal assy. as well. <_<