Printable Version of Topic

Posted by: 2xs performance Apr 1 2012, 01:58 PM

How do you remove windshield washer nozzles?
Don't want to break them. Is there a nut under them or do they pop out?

Posted by: A&PGirl Apr 1 2012, 02:10 PM

QUOTE(2xs performance @ Apr 1 2012, 02:58 PM)

Posted by: DonTraver Apr 1 2012, 02:13 PM

Reach underneath the cowl and wiggle and push them out. Lube them with soap and water first.

Posted by: 2xs performance Apr 1 2012, 02:27 PM

Got them out. Neither one survived and I have a new dent in my cowl.

Hard to reach under them. There was 2 tabs I had to squeeze in for them to come out. Niether wanted to be sqeezed and it was pretty tight. ended up ripping them out.
Oh well..

Posted by: porschefile2010 Apr 1 2012, 02:41 PM

Sorry I didn't know about your problem a day earlier or I could have helped. I took mine out a couple of days ago and found out how they fitted. Managed to work them out without damage although I also dropped one of the collars under the petrol tank!!!!!

Posted by: 2xs performance Apr 1 2012, 04:00 PM

not a biggy. Guess I needed new shiny ones anyways

Car is going to paint shop tomorrow so they can fix the little dent.

Posted by: 2xs performance Apr 1 2012, 05:42 PM

New nozzles are $10-$15 each on ebay. Anyone know of a cheaper source?

Posted by: bandjoey Apr 1 2012, 09:24 PM

I bought a pair from Zim's a few months back and don't remember the price. These are the black ones with the chrome 'eyes'. ?Possibly the same as old 912-911's?
You might call to check the price as I don't remember but price was ok with me at the time.

no relationship other than I buy parts there.

www.allzim.com