Printable Version of Topic

Posted by: nsr-jamie Apr 14 2012, 06:58 AM

Had some nice weather here this weekend in Japan and was out cruising in the 914. Coming back on the hi-way and noticed my speedometer stopped working, just fell to zero. Anyways on the hi-way here and can not stop keep crusing for a while to the exit to my friends shop, get off there and drop in at their shop...we look under the car and find this.

I am not sure of the name in English, but it is obviously destroyed and was dragging on the road for some time and caused it to just wear down...also where I believe it was connected to the gearbox...it looks like something has broken off there....

Its hard to get parts for these cars here in this part of the world (Japan)...can somebody help if they know what I need? Am I missing a bunch of small parts? I don't even know the name of the part or parts as well.

Good news is that the cable is fine amazingly...

If anyone can help would be great, thank you !!

I hope to get this fixed soon cause I just entered into a classic car show here in Japan next month (May27th)




Attached thumbnail(s)


Attached image(s)

Posted by: vsg914 Apr 14 2012, 07:06 AM

Jamie, thats the angle drive. Available new. If the usual parts places can't ship it, I can and have access to new ones our used ones.

Posted by: type47 Apr 14 2012, 08:40 AM

Yea, and if you're looking for used, make sure you get a speedo angle drive with a part number that starts with 914.xxx.xxx.xx not 911.xxx .... they look the same but turn in opposite directions

Posted by: nsr-jamie Apr 14 2012, 09:17 AM

Hello and thank you. I did some research on the web and checked out the AUTOMATION site and found the part you were talking about. The speedometer cable angle drive. It looks to be one part that somehow snapped in half. Am I right? Will I only need this part? The part that was grounded down (I am holding in my fingers, see pic above) and the part that appears to be broken off in the gear box are the same part?? If I find a good angle drive will I need any other parts to complete this job such as gaskets, nuts, bolts, o-rings or something? The speedo cable is fine and still working, the rubber boot looks good too...not really sure how this happened but I guess with a 40 year old car things like this happen.

Here is the pic from the Automotion site to confirm the part I am talking about....

If someone has a good used one (from a 914) please contact me.

Posted by: jim_hoyland Apr 14 2012, 09:25 AM

Pelican Parts shows:

http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=914-318-029-01-M82&catalog_description=Speedometer%20Angle%20Drive%2C%20%39%31%34%20%31%2E%37%2F%31%2C%38%2F%32%2E%30%20%28%31%39%37%30%2D%37%36%29%2C%20%39%31%34%2D%36%20%28%31%39%37%30%2D%37%32%29%2C%20Each%20

Posted by: vsg914 Apr 14 2012, 09:39 AM

Yes, thats the part you need. The drive gear in the trans housing has the oring, so no seals needed for that part. 100 bucks at pelican and warranted for one year. I have a few working used ones, but no gaurantee on how long they will work. I would buy the new one if I could afford it.

Posted by: Jeff Bowlsby Apr 14 2012, 09:59 AM

I have a good used angle drive I'd sell for $50.+shipping. LMK.

Posted by: stugray Apr 14 2012, 11:08 AM

Those used to be the holy grail of pick-your-parts finds.

Glad to hear that you can buy new now.

Stu

Posted by: vsg914 Apr 14 2012, 11:32 AM

I was mistaken. PET says there is a sealing ring between the angle drive and drive gear. part #914 318 261 01

Posted by: underthetire Apr 14 2012, 11:34 AM

Me to. Same thing on a "good" used one. I bought brand new from auto parts wherehouse. Wasn't too expensive really.

It's the old dog dragging his leash.

Posted by: Drums66 Apr 14 2012, 12:25 PM

QUOTE(type47 @ Apr 14 2012, 07:40 AM)

Yea, and if you're looking for used, make sure you get a speedo angle drive with a part number that starts with 914.xxx.xxx.xx not 911.xxx .... they look the same but turn in opposite directions

Posted by: Tom_T Apr 14 2012, 02:08 PM

Jaime,

If you want new, then the local Porsche dealer over there should be able to order it for you too, and the price shouldn't be any more than Pelican, AA, PP, etc. - since they all mark-up from dealer wholesale.

Japan dealer may just be easier with the import regs., if the others won't ship there.

Posted by: nsr-jamie Apr 15 2012, 09:46 PM

Hi, thanks!! Do I need to get that part? If I were to reuse the old part am I asking for trouble..?

QUOTE(vsg914 @ Apr 15 2012, 02:32 AM)