Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ MPS reading 333 ohms

Posted by: newto914s Oct 5 2004, 03:50 PM

FI headaches
I broke a wire to my mps #15. I fixed it(poorly) and the cars won't start. I drove the car about 10 miles with the wire fraid and loosly connected and it barely started and just drove like crap.
Anyway, it's fixed but still drives like it's broken, so I read some of Brad Ander's FI stuff and thought I would check the Continuety of the wire harness. #7and #15 checked out OK with 90ohms but #8 and #10 are reading 333 ohms. When it should be reading 350.
Is this a big enough differance to cause the car not to start, and does this mean my MPS is trashed? What can I do?

Posted by: newto914s Oct 5 2004, 03:51 PM

Oh, 2L with D-jet

Posted by: Bleyseng Oct 5 2004, 06:40 PM

Trashed is when it don't hold a 15hg vacuum for one minute. Do this test first.
I have a pile of good core MPS's that need a good diaphram to work.

Geoff