Does anyone have, or would some one be kind enough to take, a picture of the fuse panel showing how the wires are conected on a 75 914? I replaced the original fuse panel with one from Engman and may have mixed up a wire from front to back. I have a current draw draining the battery. I pulled each fuses and the test light stayed lit for everyone. I even pulled the 2 fuses on the relay board and the voltage regulator, no luck. Any other tips are more than welcome, Thanks
Thanks for the chart, but I think 74 and later are different.
You can compare that chart with these diagrams. I think they are pretty much the same.
http://www.pelicanparts.com/914/914_electrical_diagrams.htm
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)