Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ brake line size.....

Posted by: crash914 May 9 2003, 08:50 AM

What size are the connectors on the hard lines from the caliper to the flex hose?

Are the 914 flair nuts the same thread as the BMW 320? So many questions, so little time...

Brad, did you test any MPS's yet? PM me thanks!!! herb pain30.gif pain30.gif

Posted by: Evill Ed May 9 2003, 11:07 AM

QUOTE(crash914 @ May 9 2003, 06:50 AM)
What size are the connectors on the hard lines from the caliper to the flex hose?

Are the 914 flair nuts the same thread as the BMW 320? So many questions, so little time...

Brad, did you test any MPS's yet? PM me thanks!!! herb pain30.gif pain30.gif

The lines are referred to as 10mm, NAPA and such have them.

The line part itself is approx. 3/16-in.

Yes this is the 320i caliper size, just added them to the rear of my 914 2 weeks ago.

Good luck,
Ed

Posted by: crash914 May 9 2003, 11:15 AM

Thanks, that is exactly what I was looking for..... clap56.gif

Posted by: Brad Roberts May 9 2003, 11:36 AM

Herb,

I have not tested any of them. I'm tempted to just to send you 4-5 of them.

We started our yearly production run and I dont have the free time I used too (production runs last about 3-4 months)



B

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)