I often go to swaps looking for something only to have people say "I have 4 of those at home, but I didn't bring any". I figure we can list things we need and have for sale here, to make sure we bring what people need, and people bring what we need. Since there's talk of a sawzall party, we can make a wish list of neded body parts too. So here's my info:
I need:
Passenger side door (late style)
Passenger side outer door handle (not perfect, but functional and cheap)
Seats (maybe)
All rubber seals
5 lug rear hubs
Clutch cable
228mm flywheel and clutch
I have for sale:
1973 1.7 with salvage title (I won't be bringing this unless somebody wants to buy it)
tan interior
bus 2.0 engine, complete and disassembled with pretty fresh heads
1.8 engine in unknown condition
pretty much every transmission part from a 914 or early 912 (4 speed)
SS 1.7 heat exchangers
2.0 heat exchangers
monza (I think) exhaust
rear trunk lid
entire front suspension/steering (4 lug)
used rear axles
several flywheels
Body parts I need from sawzall victim:
Drivers side outer sail panel, down to the door handle cutout
Is anyone bringing a spot weld drill bit? (I don't have one) I have alot of smaller misc things, and I'll check this thread before I leave to make sure I bring specially requested items.
Passenger side door (late style).............yes
Passenger side outer door handle (not perfect, but functional and cheap).......think so
Seats (maybe)...........yep
All rubber seals..........
5 lug rear hubs.......... not me
Clutch cable............... have to look
228mm flywheel and clutch..........huh?
I have for sale:
1973 1.7 with salvage title (I won't be bringing this unless somebody wants to buy it)
tan interior............Is this the 15K car?
Body parts I need from sawzall victim:
Drivers side outer sail panel, down to the door handle cutout..........your choice of two, you bring the blades.
There, that narrows it a bit.
come down a day early and AX
ron the parts whore should have anything you need!
EDIT: damn,,, too slow
Sweet, blades I've got. Now I just hope I can sell some of this stuff so I can afford to buy some stuff.
15K car? As in miles or dollars? Either way, no
(The car has a black interior, the tan interior came out of my current project. They're separate.)
Aaron: I'll be coming down in a van full of parts.. It'd be like trying to AX in a fire truck
A NEW ASS, MINE HAS A CRACK!
i may need the rear decklid... what are you asking?
This one hasn't been hammered.. it's just a wide shallow dent, left unfixed it would just barely show up. I'll bring it and you can look at the underside and decide. (it's already in the van)
Ron: Do you still need a ride for the car?
Joe
Need:
Passenger side front fender (complete) and since Bondo is a good friend of mine he'll let me use his tools to cut one off of a car if there is one to tear it off of
Drivers side rear fender (the whole damn thing)
-Tony
Needed, right side and front right side engine tin for a 1.7.
Joe
Anyone have a good front bumper pad? I'd hate to bend over and grab my ankles for the folks at Auto Atlanta or Pelican on my first "significant" purchase for my "new" 914. Those suckers are expensive, almost 3 bills!!! YIKES!!!
Good idea Bondo,
What I got:
-4 fiberglass flares
-rebuilt 73 D-jet computer
-1.7/1.8 heat exchangers
-Monza exhaust
-3.1L Corvair engine for a 914 (ask)
-Hard top dash cover ( may ebay first, depends on offers)
-Miscellaneous parts (ask)
911, 914-6 stuff
-'74 heat exchangers
-2 oil coolers in great shape
-911 tin
I have much more, but it has been a week since I have been in my rats nest.
What I want:
-916 rear end!!! Please
-more to come
I have a bomb ass rubber front end (actual shape is good, but it is painted). Make an offer.
Scott: Thanks , I'll do that. Thanks.
With all the stuff everybody has to bring , this should be a great swap meet.
Bondo: What color of door are you looking for.
Joe
Mike: Rubber front end? as in air dam?
Joe: Doesn't matter, but it looks like I've got the door taken care of now.
Royce,
nope, as in rubber bumper insert fot early model.
HTH
Reasonably clean headlight buckets that I can get the #$@%^!!! screws out of w/o dremmeling the screw slots
I need the interior roll bar pad that covers the rear targa latches. Most anything will do, but would prefer one with minimal cracking of course. Also looking for a decent set of fog light grills, front bumperettes, a wiring harness for the center console gauges and rocker panels that are fairly straight.
I have some good weatherstripping, a 2L f.i. system, a 2L monza muffler, sand blasted but uncracked windshield and much more crap; er parts that I don't take to Pomona anymore.
Don't forget to move your clocks back an hour the night before or that morning!
I want brown cloth/velor/leather/something besides vinyl seat inserts.
And brown door panels that do not have the speaker hoes cut in them.
My calendar has the 24th and 31st on the same square (I hate when they do that) and has a notation for daylight savings time and a notation for halloween in the box. I guess that makes my calendar useless for resolving the issue
It is on the 31st. I have a better calendar.
Andrew
Damn, one less hour of sleep.
Duffster - Reasonably clean headlight buckets that I can get the #$@%^!!! screws out of w/o dremmeling the screw slots - Yes, plenty
Ron: Do you still need a ride for the car? - Don't know yet, but we can cut it where it is.
Joe
Tony - Passenger side front fender Drivers side rear fender (the whole damn thing)
YES and YES
(good way to bump the thread)
Needed:
1 sevicable flywheel
1 -2 cam gear
Headrage: You forgot to mention boots for your injectors.
Joe
Oh yeah.
2 ea. Injector boots
I need a chrome Fuchs center cap to match my other 3.
Attached image(s)
I think I can use some seats. PO replaced original with some Corvette seats... but I don't like the way they look/fit in the car.
I'm 99% sure I will be there. I plan on driving Elvira unless somebody makes me an offer for the race car and wants me to deliver it.
I would love to be able to come down for the full weekend. It is nearly impossible for me to get out of work on a Saturday. (I work in a casino) I am planning on getting next weekend so I can go racing with VARA. There is no way I can call in sick 2 Saturdays in a row.
come on john, AX with fellow teeners? or go race Vara... seems like an easy one for me
I already beat everybody (except Bill Pickering - nine14cats) in my class at the WCC.
I am going to race with VARA where I hope to find some competition.
Here I am with my hands full in the last VARA race.
http://gordon.smugmug.com/gallery/90443/12/3169507/Large
Can somebody show me how to get around the blocks on this web site and post the picture directly?
This one is for you John -
I can bring some sets of these to the swap meet. $40 a set.
Let me know. Laser cut, 1/4" wood.
Attached image(s)
I've got some things on my shopping list for anyone who's sellin' stuff:
Lug bolts
Center caps that will fit on Rivieras
Sun visors - they don't need to be perfect, just functional
Window cranks - anything that won't snap after a week or two. <_<
Bump and update! Things have changed, and here are my updated lists:
I need:
Euro taillight lenses
Seats (maybe)
All rubber seals
228mm flywheel and clutch (for late SBC)
Decent rear shocks
Trans gasket set
Black headlight surrounds
I have for sale:
1973 1.7 with salvage title (I won't be bringing this unless somebody wants to buy it)
bus 2.0 engine, complete and disassembled with pretty fresh heads
pretty much every transmission part from a 914 or early 912 (Including the H gearset)
SS 1.7 heat exchangers
2.0 heat exchangers
monza (I think) exhaust
entire front suspension/steering (4 lug)
used rear axles
several flywheels
Passenger side door (late style with repairs)
Door handle and ignition lock set with 2 keys (needs plastic parts that always break, no key to one handle, broken stud on other handle)
4 lug hubs (late)
Brown door panels in good condition with no speaker holes (I believe Toast wanted these)
2.0 MPS (appears good, bring a 2.0 to test it)
I no longer need any parts from the sawzall car.
Is there going to be a free parts pile at this swap? If so I have some parts to contrubute
Wanted:
One NEW (NOS) Factory Driver's Side Sun Visor.
not used, not in almost new...or in really good condition... I have one of those...
New in the box NEW...
Cell is 407-252-6347 if you are successful.
Thanks!
I just by chance happen to have a brand new transmission gasket set here in my garage. I bought 2 of them a year or so ago. Wanna trade for your salvage title car???
Now what would I do with that? I already have a couple of sets of those. I just want your car to fix up for Mrs. K to drive. It would be going to a good home. We will talk about it on Sunday, if you are still coming?
Oh, I'll be there! I have a new plan for the salvage title 914.. Since nobody wants it (probably because it looks like hell) I'm gonna fix it up and make it look decent, then try and sell it. (and drive it with it's fun factor and good gas mileage in the meantime) I already replaced some parts and got it running MUCH better.
So its not for sale anymore? I guess I will keep looking then.
It's still for sale, selling it before I do the work would save me alot of trouble.. I've just pretty much lost hope now. If I can sell it, great. But I'm not holding my breath. I definitely need to get more for it than a gasket set though
I knew that, I was kidding, I do have a sense of humor. Sometimes. We will talk about it at D&G.
Cool. See ya there!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)