Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Engine mount bar bolts size?

Posted by: chris914 Oct 9 2004, 04:15 PM

What size tool do you need to remove the engine mount bar bolts?

Posted by: tommy914 Oct 9 2004, 04:30 PM

I think mine are 17mm, for the big center one, on a 73 mount.

Posted by: Cap'n Krusty Oct 9 2004, 04:42 PM

The nut on the top side should be a 17mm, but may be a 15. The bolt wrench size is either 17mm or 8mm inhex (allen). The center bolts are 8mm inhex for the early bar, and a 13mm socket is used to remove the center nuts on the late bar. The Cap'n

Posted by: sgomes Oct 9 2004, 07:22 PM

The same size tool that you can use for anything on these cars...