This is a GB for the main targa seal and the lower seal that goes with it. I have a few in stock now and will be doing up another run. If I can bump my quantity up it will help me to keep the costs down on these.
I'm not asking for cash on these now only a commitment to purchase when that are ready in 5 weeks.
I will be making some improvemets to them, but for those of you that haven't used these, they are much easier than OEM to install as I use a slightly different clips system. The clip is also aluminum so it will not rust.
That with the lower seal that often is cracked and is a secondary barrier for water. These alone used to go for $78 a pop.
Anyone remember when an OEM one of these went for over $700 on ebay and we were all afraid these were never going to be available again?
Not to worry, I'll do my part to try to make restoring these cars less expensive.
So who's in?
Attached image(s)
Here's the lower main being installed.
Attached image(s)
I'm in.
I'm in.
I'm in.
In for one set. GREAT DEAL!!!!!
I'm in
Yes please! (I'm in) Thanks!!
I could use a set for $125.
I'm in for 1...
I'll buy one set.
Im in!!
In.
I'll play for a set.
Count me in
I'm in for a set
I am in for 1 set please!
Car has been in storage for over three years now. Pretty sure I need these.
I'm in.
Mine is trashed! In for one!
I am in.
I'm in.
How much money?
Read the thread title.
I'm in for 1
Mark, add it to my ever growing list..
roman
I'm in for one
Ad me to the list for 1.
Jerry
1 for me
I need all the rubber, i'm in.
im in for a couple
I'll take two sets! Let me know when it's time for money to be sent!
I am in (I am not on here a whole lot, so I will PM you my information)
Thanks! I was just thinking about biting the bullet and getting one of these off ebay...great timing.
sorry...this was an accidental double post.
I'm in!
I will take one. Thanks.
I'm in!
Good news I'll have enough material to start doing the 1st 10-15 up after the 4th. The rest will be about a week later.
Seems like I'll want this to go along with the new targa top you're making, so - in for one.
Count me in for two. I'll need some other trim/seal pieces too. Thanks!
I'm in for one.
Is thas for a main targa seal and/or the piece under it?
Any update?
Hey Mark, any chance, if you have enough material left over to make one more that you would sell just the upper main seal? The repair I ordered from you didn't work. I destroyed the ends of the one I had in the car when trying to install it (the rubber "caps" that fit over the aluminum trim fell apart). I still have the lower and its working great. Shoulda ordered the whole thing the first time...
Hey Mark, I will commit to a set if they are still available.
thanks either way
Dave
These are actually in production now. I opened a group buy to move a few more of these to help bring the costs down and share the savings. I have the first group going to be available end of the week. As soon as I have the sides molded I can start producing them and will start contacting those that have signed up here.
Thanks for asking. I intend to keep this buy open at least to the end of the month of July.
-Mark
Put me down for one too!
No hardware but, please predrill and tap.
Thanks
Denny
Hi. Put me in for one set please.
I'll be doing up 12 this weekend and will be contacting those in order of response. I should have at least another 10 per week until these are filled. Group buy closes when I have all the orderes filled.
Hello Mikey
I would like one set too but i would like to buy some more seals if you can send them in one packing
914 targa to window seals
914 Vertical Targa seals set of 2
and 914 Front trunk seal set
Thanks/Josef
I'm in.
I'm in for a set to please.
Thank you
Rudy.
I'm in
I'll take a set too.
Got the 1st set of 12 out, will be contacting another 15 tomorrow. Yes, still available, just making up batches as I can, now that I have all the parts.
-mark
I will need two sets
Thanks,
Carlos
I'm in for a set.
1st 24 have been conatcted and next friday another 12 will be conbtacted. I'm getting 12 per week made up.
-mark
I'll take set!
I will take one. It is the all one piece that will go down the triangle glass on the sides? Right. Just making sure cuz the corners of mine is what is in bad shape.
That's Great Mark
Remember, I only need 1
I'm in for 2 sets if you decide to do another run. Thanks!
I'll need one also. Thanks Mark
Im for one if the group buy is still open.
Dan
mine came in the mail today!
the look to be of very good craftsmanship and i can't wait to install them.
thanks Mikey/ mark
I'd like one.
Will you contact me directly on the details?
I thought i was in for a set last time??? but heard nothing back!
Still interested in a set.
Marc
I'll need a set as well, thanks
Playing catch up on these. Will be doing more up this weekend and should be finishing up the rest of the list here in the next 10 days (2 weekends). I'll be contacting more on the list Friday.
Mine came in a few days ago and they looked great. Can't wait to install it tomorrow.
I'd love a set if you get this far down the list.
Sorry, got a little back logged, but did get another 8 done this weekend. I'll be contacting everyone in order tomorrow afternoon.
-Mark
I'm just curious, which post number are you at with delivery?
Mark,
I'd like a set as well if they are still available. I sent a PM as well to get on the list.
thx, Turk
Are we there yet? Haven't been contacted yet.
Dan
Right now I'm out of the top extrusion to assemble these. I will have more the 11th, then I can keep these rolling. Sorry for the delay, I didn't plan on selling these this fast. I do have the sides preassembled for 20 more sets
-mark
PS I have sent PMs on these up to post #49
Cool ................ I think I'm #52.
See the time of that last post that should move me up the list somehow, shouldn't it? It's fate, destiny, something like that, i tell ya.
I'm post #57 .................... so I'm getting close.
I ran out of top section material. I'll have more this next week and the prodcion will resume. Sorry for the delay.
-mark
no hurry but put me on the list...
I was just looking at your site yesterday for this and noticed it said "out of stock". Since you've had a delay, can you squeeze in one more?
Yes, and these will start flowing again Tuesday. I was out of the upper extrusion to make these and I will have it ready tomorrow. Ot was extruded Friday is ready to be assembled.
PM going out tonight.
Did anyone receive instructions with their targa seal? If so, can you post them on here?
I'm back from New York and as promised, I checked my email and have found the instructions Mark emailed to me. So, here you go:
InstallationInstructionsFor3_partMainTargaSeal.pdf
Hummmm, the PDF didn't copy over the the forum post. Let me try this again.
Main targa seal installation instructions. Giving it one more try.
Thanks for keeping your word and posting this, however I'm having trouble with that link. How many pages are in that pdf? Maybe you can scan them and attach to this post as a jpeg image
Hey Tim!
I'm working and way to busy to do the scan and post thing. If you PM me your email address I'll forward Marks' email with PDF instructions attached.
Thanks Mark
Hey guys, anyone that needs installation instructions for this Targa seal, I have started a new thread.
http://www.914world.com/bbs2/index.php?showtopic=195371
Thanks for getting this up for me. I try to email these when they ship, i just got back in and saw you got this up.
Thanks,
Mark
Mark,
Installed my Main Targa Seal, and lower seal last night, worked great, and easy install.
Makes a (914)world of difference.
thx, Turk
Mark,
I'd like 1set if it's not too late. Thx.
-Scott
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)