Rear Transmission support using 911 supports - Haynes shows 14.5lb torque
Front (at the side of the bar) motor support bolts - Haynes show 21.7lb torque
RIGHT??
Nothing is shown for the rubber motor mounts? New solid rubber from the Bird
Torque??
Thanks Guys. I'm under the car waiting.
In general, 8mm bolts call for 14.7 ft/lbs, but 18-19 is OK. 10mm fasteners use about 35 ft/lbs, and 12mm use 56 or so. Do that and you'll be OK.
The Cap'n
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)