Trying to align the shift rod. I can feel the detents by moving the selector forward and backward but not sure of the up and down movement.
When the selector is up, is that for the 4 & 5 gears or is that for R & 1 ?
Also, I don't feel a positive stop at the center (2 & 3) gear. How do you make sure you are in the 2 & 3 plane?
Up is 1&R and forward is 1.
I don't think you can feel positive stops for 2&3 so go half way between up & down If you are in the right place, you will be able to move the selector forward and back, otherwise not.
Andrew
goto my home page. directions on how to align
http://home.san.rr.com/pb914/
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)