Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Shifter vibration

Posted by: 2-OH! Oct 20 2004, 01:20 PM

My shift lever in the 75 is vibrating at certain RPM's ...What's worn out and causing the problem...Is something lose or worn or both under the shifter...

New bushings in the back and at the firewall...

2-OH!

Posted by: tdgray Oct 20 2004, 01:22 PM

Just your shifter is vibrating.... lucky you biggrin.gif

I know wise ass - sorry can't help with the problem.

Posted by: RustyWa Oct 20 2004, 01:25 PM

I chased mine for a while. I checked and fixed all the usual suspects to no avail. It turned out to be the nut on my inside rear trailing arm was slightly loose.

Posted by: dmenche914 Oct 20 2004, 02:15 PM

worn tranny or motor mounts can cause excessive vibration, so check the rubber mounts ont he tranny tail, and on the motor mount cross bar. You are ont he right track with new bushings also.

dave

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)