Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Parts Cleaning
Posted by: Highland Jul 8 2012, 08:46 AM
How should I clean my parts (case, crank, rods, etc.) after they come back from the machine shop?
Tom Wilson's book says to use soap and water, but I can't find any other guidance.
I know this is a very basic question, but I'd rather look foolish than do something wrong.
Posted by: rwilner Jul 10 2012, 07:20 AM
QUOTE(Highland @ Jul 8 2012, 10:46 AM) 
How should I clean my parts (case, crank, rods, etc.) after they come back from the machine shop?
Tom Wilson's book says to use soap and water, but I can't find any other guidance.
I know this is a very basic question, but I'd rather look foolish than do something wrong.
In Jake's video, he sprays them with carb cleaner and then wipes them with a lint free rag or blows them down with compressed air.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)