These look great. I'm putting one in my car. The Boot if you need one is $12.
Shipping is $18 domestic.
these will come with the mounting hardware
So who needs them?
Only need 9 as one is mine
Attached thumbnail(s)
I'm in when and where do I send payment. With a boot.
Hold onto the cash for the moment as soon as we get 5-6 of these spoken for I'll get the materials inbound and ask for the cash.
I'm in with boot
Put me down for one, I have another idea for the boot though.
Thanks,
Vysoc
Figured I'd comit to buy up the rest. These will be $200 after the GB, so if I sell them out say by the end of the month, they'll be $159, if not I'll add them to inventory.
the 1st ones are to be here Saturday.
I'll send PMs later this evening.
Got them in and even made a few in Tan. I'm quite happy with the quality.
have a few options-
Without holes - holes are in the wood, and gages can be installed.
1 with 2 holes (3 is there and can be used if you add a gage later).
Standard all 3 holes.
Just let me know your preference here and I'll PM youwith the info. I will need a zip to calculate shipping (should be around $24 +/- a few bucks - for domestic).
The tan is $10 More.
Attached thumbnail(s)
black 3 holes with boot
Is there anything special required for the heater control lever? I don't have a console in my car, but I seem to recall the lever on console cars is different. Also, what about the little light and cover that indicates heater fan on, located adjacent to the fan lever (at least on my '76)?
If you had one at the cut-down height that goes under the a/c I'd steal the money somewhere.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)