Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ battery tray and 914-6 conversion

Posted by: worn Jul 30 2012, 03:05 PM

I am in the process of welding up the trouble areas in the engine bay in preparation for a 3.2 conversion. I removed the engine mount supports, and then the rusted longitudinal sections underneath, so the battery tray is currently in the scrap heap. I would like to cut out the suspension ears because they keep catching my back as I bend under, but will stop short of that . But it occurs to me that I need not necessarily want to replace the battery in the original place. My 911 for example carries its battery in the nose, neatly counter weighting the AC compressor that isn't currently there.

Also, a battery in the stock 914 location might be a bit in the way with the 3.2.

So, what is the preferred location? Stock? Or, moved.

BTW. Are there any other things that I am better off without such as the MPS bracket or the relay box holder? I am hoping to gain from your experiences.
Thanks.

Posted by: mepstein Jul 30 2012, 03:56 PM

You can put it anywhere. Front, back, I've even seen it in the passenger compartment. But I'm going stock. Doesn't take up trunk space,short cables, looks good, it should fit in a normal 3.2 conversion and it - theoretically- offsets some driver weight.

Posted by: ellisor3 Jul 31 2012, 08:17 AM

I decided to leave mine in the stock location, will fit fine w/3.2 and you don't have to go to multiple places if you need to disconnect it. I did remove the rain tray. You can see some pictures of it if you click on the Signature.