I need this hardware and am not sure where to get it from. Anyone know?
Attached image(s)
Brake parts - probably have to get them used unless I can talk to one of the rebuilders and see if they can get them.
Front or Rear Scott?
Get me part numbers and I will call my supplier to see what he can get.
The kit shown is the one I need, It is for the rear
If anyone can get these kits... I'd like to sign on for a couple.
Stoddard?
Me too. Put me down for a set.
I'll take a pair as well.
So there seems to be a need for it, someone should track down a source and share it with the rest of us. The picture I posted was from an Ebay auction that ended the other day, I missed it by 20 minutes. I had it marked to watch but called out for a job and didnt get back in time to bid. It went for about $20.00 from some guy in Hemet.
Looks like rear brake parts for those widening stock 914 calipers. Rich Johnson supplied mine but were included with the calipers as well. Not sure if he sells just the parts but worth a try.
John
Attached image(s)
Those parts are just stock parts. The caps don't have any part numbers that I know of.
I could use a set of (4) spreaders also. 2 for 911 S calipers and 2 for 914 rears. Are they different? Can these be had at FLAPS?
There is not a Kit. The parts are sold each form porsche. The spreader bar is a good part #914 352 908 00 EXPANDING SPRING
The Clips are #901 351 955 10 LOCKS
I dont have the other #s
Try here http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=BAR&MfrPartNumber=0841167&PartType=354&PTSet=A or Shuck's, Kragen.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)