I currently have Fuchs 16 x 8&9s, and want to get a set of 17" wheels so there are better track tire choices (will be running 225/45/17 and 245/40/17).
Which 17" wheel do you think would look best on a 914? I've narrowed my choices down to:
Lindsey Racing 17" Fuchs P2
Fikse Profil 10
Kinesis K27
I'm leaning towards the Lindsey Racing 17" Fuchs because Fuchs' just look so right on a 914. But, I already have a set of 16" Fuchs so thought I'd consider something else. I'm afraid the other wheels will look too "modern" on a 914.
I don't have many good side pictures of my car, but here is one...
Whaddya think?
-Steve
Attached image(s)
17" Fuchs:
Attached image(s)
Fikse:
Attached image(s)
Kinesis:
Attached image(s)
I have those Fikse rims....nice to be able to repair 'em by replacing a rim half (had to do this once)....the rims are a PITA to keep clean with all the little spokes...
Those Fuchs look "okay", but to me, the center section looks too small compared to the outer half (ratio looks wrong)
Honestly IF it where my car, I'd get the Fikse... I love that updated look.
If its track...
Which ones are lighter?
Andrew
I think they are all very close in both weight and price...
-Steve
My vote is for the Fikse wheels.
If it's just for track wheels... I agree with bighbohr
Go get a set of Cup1 wheels which can be had in the correct offset (so no spacers needed and you can swap em with your 16" Fuchs easily)
If money is no object... Go for the 3 piece 17" Fuchs wheels that HRE makes
Hmmm... That's not a bad idea, but I thought all of the later wheels would require use of spacers. Which wheel are you talking about?
-Steve
This one?
Attached image(s)
Or this one?
Attached image(s)
Or this one?
Attached image(s)
First pic is the Cup1 wheel in 16"
Came on the 964 and 968 cars
Second pic is the Cup1 wheel in 17"
Came on the same cars as above
Third pic is the 17" Cup2 wheel
Came on the 993
You can get the 17" cup1 and cup2 design as replica's (same manufacturer as the originals), but with offsets for earlier 911s ('till 1989) so you won't need spacers.
FWIW, I have seen, handled, fondled, caressed, rubbed a Fikse wheel, and they are very well made. They are local to the Seattle area, so many guys who AX in that area use them on their 911's. Never seen them on 914's, but Im sure it will work out great
I'd love to see some pics of these on the car.
Also - don't forget you can get 5-lug or 4lug revolution wheels which are 17s.
Fiid.
kinesis 914
Attached image(s)
914 with C2 Rims
Attached image(s)
AKAIK, no factory Cup wheels are available with the correct offset for a 914 w/flares...the aftermarket Cup wheels are very heavy and a few have cracked (during track use)
C2 rims are the incorrect offset as well (spacers still needed)...by going with any of the 3 custom choices, no spacers are needed.
mille miglia?
there is a nice set of Fikse's on e-bay. Offsets and widths for a 930 but you can order new rim halfs to make them work.
If you like the Fuch look, here are the HRE 311's
Attached image(s)
I say Lindsey's 17" Fuchs. Wonder if anyone's put them on a 914? I've never seen a picture on one..
Doug C
For the HRE 311s is the center "fuch" section of the wheel larger than the Lindsey P2/P3? Is the difference between HRE and Lindsey that HRE makes the 311 from scratch and Lindsey takes your old fuch and welds on a wider rim/ taller. I guess the simpler way of putting this is do the HRE wheels have better proportions between the center of the rim in a 17 size than the Lindsey?
Nick
I think both 17" Fuchs are made from 16x6 Fuchs, so the centers are the same.
-Steve
my buddy paul had the HRE's on his carrera (pic below) they were nice wheels but took 3 times to get made the right size/offset.
I like the Lindsey wheels myself and am considering them for bluecar.
Attached image(s)
Hey soloracer, do you have any more pics of that Yellow/Kinesis car? Man that looks good from the side.
As you wish. Pic #1
Attached image(s)
#2
Attached image(s)
#3
Attached image(s)
#4
Attached image(s)
#5
Attached image(s)
#6
Attached image(s)
The car was for sale on e-bay some time ago. I believe it sold for around $23000US.
I vote for kinesis, but i like these better
THis is the car that inspired me to start my project!
Attached thumbnail(s)
Soloracer, are the fenders Sheridan's standard bodyworks?
Does anyone have any pics of how these fenders are attached?
These are nice 17 inch wheels:
Attached image(s)
Soloracer, Thanks for posting the pics.
All of these cars look great.
You know that yellow car must have had a ton of $$$ in it. If it sold for $23K, someone got a deal.
I like the Cup IIs. Yes, I had to use spacers and 100mm studs, but they're what I wanted. They'll be powder coated flat black soon.
From your list: Fikse.
Attached thumbnail(s)
yum.
I like the Fikses.
Say after me:
Fikse Fuch Fikse Fuch Fikse Fuch Fukse Fich Fikse Fuch
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)