Can someone tell me if this is a 911 rear hub or a drilled 914/4 hub (I think it's a 911 hub sinec I only see one hole...).
Also, what are a pair of 914/6 stub axles w/911 rear hubs worth?
the hub
Attached image(s)
They dont look like redrilled 4. They are most likey 911, 914-6
those look like 911 or 914/6 hubs (are they the same??? ) the two holes on the hub are threaded for the rotor to be held down by a screw or 2
Are these hubs & half shafts (w/ the 914/6 stub axles) worth anything? (yes, I'm parting out my car after a little, er, "incident" at Lime Rock in Sept...)
wow, i listed mine for 300 and had like 5 guys saying i was crazy high....go figure. and 911 and 914-6 hubs are the same if you use early 911 rear hubs
Hubs & stub axles together would prolly be worth that much.
Should be a P/N cast into the backside of the hub: 901 331 065 XX (the -6 didn't have the three hub centric lugs{?})
Wayne (type47fan)
Definitely 911 rear hubs. The extra big hole there is for the parking brake adjust. Don't know if the 914/6 had it or not. Someone please verify. As a set, the hubs and stub axles are certainly worth good money. Even better is the trailing arms and axles complete.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)