Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Need help with Camshafts!?

Posted by: slugmika Oct 25 2004, 02:05 AM

Hi all performance guys.
I'am thinking to change my stock 3.2 euro sixer's camshafts to some more agressive ones.
What would be the best ones to go with?
My engine has Hestec efi and my own design race header's there's also the K&N air filter.
Engine is dynoed and have 200kw & 310nM.
Heads are ported and the engine has been rebuilt 1year ago.

I have searched the net and only ones that i found were Motor Meister and Webcams.
I did read my performance handbook but i believe that there might be more presice information in here smile.gif

My headers work well with the current setup but i could also change those to suit the new cam's.

Is there any point to change the stock one's? I'am not changing the P's and C's so the cr will remain stock.
What could i gain with new cam's and header's +10, +20 or what hp?

Thanks
-Mika-

Posted by: Lawrence Oct 25 2004, 11:21 AM

I hate to refer anyone to another site... but this might be a good question for the Engine Rebuild forum on the Bird Board.

-Rusty smoke.gif

Posted by: slugmika Oct 26 2004, 12:12 AM

Ok. i'll try that.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)