Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Master Cylinder Replacement only has one spade
Posted by: kbrunk1 Sep 6 2012, 09:30 PM
My new 17mm brake master cylinder only has one electrical spade.
Is there a work around?
My old one has two electrical spades.
Posted by: type47 Sep 6 2012, 10:00 PM
Your old one has a ground connection as the second spade terminal. The single spade MC grounds through the body. Tape up the brown wire.
Posted by: kbrunk1 Sep 6 2012, 10:33 PM
QUOTE(type47 @ Sep 6 2012, 11:00 PM) 
Your old one has a ground connection as the second spade terminal. The single spade MC grounds through the body. Tape up the brown wire.
There are also two washers with the new master cylinder.
there are three lines going to the MC.
Are the two washers for under 2 of the 3 lines?
Posted by: Dr. Roger Sep 6 2012, 10:45 PM
2 new washers are for the 2 nuts that hold the MC to the body.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)