Printable Version of Topic

Posted by: Mueller Oct 27 2004, 02:39 PM

well, I was too cheap to send it off to harness expert Jeff Bowlsby, so here is my 1st attempt at making a somewhat "decent" harness for my megasquirt install.....


Attached image(s)

Posted by: crash914 Oct 27 2004, 02:41 PM

Waaayyyy too much time on your hands....

I did mine all in purple....got a deal on a spool of wire....$3.00 for 500 ft.

of course it looks like a birds nest......

looks kool....

Posted by: TonyAKAVW Oct 27 2004, 02:42 PM

nice!!! what kind of wire did you use and did you spend a fortune on it to get all the differeint colors?

Is that shrink tubing or some other kind of tubing?


-Tony

Posted by: Joseph Mills Oct 27 2004, 03:09 PM

Looks Way Cool!

Posted by: seanery Oct 27 2004, 03:13 PM

ith very thweet Michael.

Posted by: mikerose Oct 27 2004, 03:29 PM

Posted by: Aaron Cox Oct 27 2004, 03:44 PM

along the lines of what i was gonna say!

ith tho purdy~

Posted by: airsix Oct 27 2004, 03:48 PM

Mike, that looks great!

-Ben M.

Posted by: lapuwali Oct 27 2004, 03:50 PM

Looks great...Hope mine ends up looking that good.

Posted by: phantom914 Oct 27 2004, 03:50 PM

You guys from Corona talk funny!

Andrew

Posted by: Jeff Bowlsby Oct 27 2004, 06:08 PM

Lookin Guud MM...

Are you using L-Jet injectors?

Posted by: lapuwali Oct 27 2004, 06:50 PM

He's Megasquirting a 1.8, so I'll bet it has L-Jet stuff on it...

Posted by: anthony Oct 27 2004, 06:58 PM

Looks great! Paint it if you don't like the color.

Posted by: Mueller Oct 27 2004, 10:16 PM

....ya, I tried to find "rainbow" color'd shrinktubing, but damn if they don't make it

Jeff,

I only had an L-Jet harness to take parts from, I "should" have a 2.0 harness someplace ?!?!??

.....sorta...1.8 bottom end with 2.0 heads and intake setup. (2.0 injectors)