Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Kerplunk! Something fell off!
Posted by: ericoneal Sep 29 2012, 06:46 PM
This is was hanging down and resting on my Engine support bar after my drive this evening.
Pretty sure its a piece of sheet metal from somewhere, cylinder head jacket? Anyone know what it is exactly. Should it be as easy as just re-attaching with some bolts somewhere?
Looking to get under the car when I get back home later and things cool down, would appreciate any help, still a noob...
Thanks
Posted by: SLITS Sep 29 2012, 08:30 PM
It's the flat plate (warm air guide) that sits on the driver's side heat exchanger. It is attached to the heat exchanger by two cheese head screw and either one or two to the engine case.
It is exactly in the position it should be. Either the attaching screws fell out or the tab they fit in broke off the tin.
Posted by: ericoneal Sep 30 2012, 08:19 AM
I think a tab must have broken off, i cant see how to reattach it. Is it OK to drive it like this for awhile you think?
It's the flat plate (warm air guide) that sits on the driver's side heat exchanger. It is attached to the heat exchanger by two cheese head screw and either one or two to the engine case.
It is exactly in the position it should be. Either the attaching screws fell out or the tab they fit in broke off the tin.
Posted by: 76-914 Sep 30 2012, 08:30 AM
yes. btw, look in our Classifieds. there was at least one add in there for engine tin, recently.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)