Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Console Reinstallation Question

Posted by: kbrunk1 Oct 4 2012, 09:50 PM

Got car with console not assembled.

Anyone know where the two small metal parts go?

Posted by: partwerks Oct 4 2012, 09:57 PM

I could be wrong, but I don't think either one go in the console?

The one looks like that plate that goes under neath the middle cushion as a cover on a access hole to the shift rod?

Posted by: 914itis Oct 4 2012, 10:04 PM

Yes, one goes on top of the tunnel in the front under the center console and carpet. The other one to the back closer up the firewall under the arm rest area. They are both access cover to the tunnel , front and back .

Posted by: SirAndy Oct 4 2012, 10:05 PM

QUOTE(partwerks @ Oct 4 2012, 08:57 PM)

I could be wrong, but I don't think either one go in the console?

You are right!

The first one actually goes on the back of the center tunnel, between the seats and underneath the tray, if you have that.
It covers the access hold for the rear of the center tunnel.

The second one is important and it not only covers the front center tunnel access but is also used to secure your pedal board so it doesn't move.
That bold you have in there is supposed to go through the pedal board and hold it in place.