914World.com [Powered by Invision Power Board]

Posted by: bcheney Oct 6 2012, 09:43 PM

Can anyone tell me the measurement from firewall to the end of the clutch tube (the end closest to the engine). Many years ago I had the Floorpan replaced along with the area around the clutch tube. Today when finally installing the clutch cable I've noticed that the tube was welded in place incorrectly...

Posted by: bcheney Oct 7 2012, 06:33 AM

QUOTE(bcheney @ Oct 6 2012, 11:43 PM)

Can anyone tell me the measurement from firewall to the end of the clutch tube (the end closest to the engine). Many years ago I had the Floorpan replaced along with the area around the clutch tube. Today when finally installing the clutch cable I've noticed that the tube was welded in place incorrectly...

Maybe someone has a car on jackstands...with engine out and can take a quick measurement?

Posted by: pilothyer Oct 7 2012, 10:05 AM

I have measured three for you and they all have from 1.5 to 1.75 inch stickout.

Posted by: bcheney Oct 7 2012, 10:49 AM

QUOTE(pilothyer @ Oct 7 2012, 12:05 PM)

I have measured three for you and they all have from 1.5 to 1.75 inch stickout.

Thanks so much!

Posted by: jimkelly Oct 7 2012, 11:05 AM

pic of mine

Attached image(s)

Posted by: rdauenhauer Oct 7 2012, 12:53 PM

The tube following the the factory bend(s) is exactly 41.75" end to end

Printable Version of Topic