Printable Version of Topic

Posted by: Aaron Cox Oct 30 2004, 08:24 PM

need to get longer studs.....

cant find any that match the included ones.

Posted by: URY914 Oct 30 2004, 08:28 PM

Back a stud out and use a bolt.

Hex head allen bolts give a clean look.

Paul

Posted by: Aaron Cox Oct 30 2004, 08:33 PM

agreed. still need to know what the pitch is. is it even metric? i couldnt find anything that fit... really close to 8/32 SAE, and smaller than m5 bigger than m4

Posted by: phantom914 Oct 30 2004, 08:45 PM

Aaron,

If nobody can help you, come over and I'll help you figure it out. There is a place local also that has just about any size and style you might need.

Andrew

Posted by: SirAndy Oct 30 2004, 08:46 PM

and once you're done, let me know as i have to do that as well soon ...

Andy

Posted by: Aaron Cox Oct 30 2004, 08:47 PM

i may take you up on that....

the place i went to had thread checkers etc. didnt belong in metric land...... so i went to standard land. 8/32 threads 92% through the wingnuts...... arg

Posted by: skline Oct 30 2004, 10:26 PM

Aaron, if you come over tomorrow we can go over to the place i get all my stuff, They have some all thread I am sure will work and you can cut it to the length you need.

Posted by: URY914 Oct 30 2004, 10:27 PM

That is strange 'cause my metric bolts worked w/o a problem.

Paul

Posted by: Mark Henry Oct 31 2004, 07:52 AM

A lot of the aftermarket stuff, like air cleaners, linkage, etc. have SAE threads.