Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Difference between Hubs?
Posted by: falconfp2001 Oct 24 2012, 03:54 PM
I'm currently sourcing for a 5 lug upgrade and I have already sourced the Bilstein 3.5 struts for the front that I'm going to rebuild. They came without the front hubs and calipers. My plan is to use the Brembo calipers with vented rotors but I had a question about the hubs.
Is there any difference between the 930 hub and the 911 hub or is it just the part number?
Posted by: 914Sixer Oct 24 2012, 07:18 PM
Turbo hubs are thicker on later models. Early models were stock hubs with spacers IF I remember correctly.
Posted by: mepstein Oct 24 2012, 08:29 PM
The Brempo's that PMB sells work on 3" struts.
Posted by: falconfp2001 Oct 25 2012, 01:29 PM
QUOTE(914Sixer @ Oct 24 2012, 06:18 PM) 
Turbo hubs are thicker on later models. Early models were stock hubs with spacers IF I remember correctly.
Spacers between the hub and rotor?
Posted by: Elliot Cannon Oct 25 2012, 04:21 PM
QUOTE(falconfp2001 @ Oct 24 2012, 02:54 PM)
I'm currently sourcing for a 5 lug upgrade and I have already sourced the Bilstein 3.5 struts for the front that I'm going to rebuild. They came without the front hubs and calipers. My plan is to use the Brembo calipers with vented rotors but I had a question about the hubs.
Is there any difference between the 930 hub and the 911 hub or is it just the part number?
Come to the G&R and buy my wheels.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)