What type of under pad are you putting under your 914's carpet.
Does the foil backed stuff from JC's work? I would like something that will not soak up water like a sponge.
Cheers
Kerry
I guess drugs would be the obvious answer....
I used a vibration dampening mat. It's very heavy. I also used it on the firewall and under the seats and on the front trunk and rear trunk floors. It definitely cut the sound down.
McMaster-Carr - Do a search on Vibration and select Vibration Control Compounds.
http://www.mcmaster.com/
I got the cheapest one. I also bought a 5 gallon pail of the paint stuff to use inside the doors and the wheel wells, but haven't done it yet. I figure I've added 50 lbs to the car....
James
Take a quick visit to your local auto body supply store.
They usually have several flavors of sound-proofing available, and you can choose one that you like best.
-Rusty
POR15.
I didn't put anything under mine when it went back in after rust removal.
Right now there's a big discussion of several sound deadening products
over on the 911 pelican list.
Mark S.
'70 914-6
Use Jute. Dont glue it all, just the coners. If it gets wet, replace it. Less exspensive...
im ready to do carpet also.
i have bare floor pans showing (not bare- painted).
tweeks sells "914 floor matt" stuff thta goes under carpet for like 59 bucks. what is it?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)