Printable Version of Topic

Posted by: worktheweb Nov 5 2004, 07:53 AM

They're mine and I have them on Ebay but I don't know what they'll fit on. They look (to me anyway) just like the ones currently on my 73 2.0. Granted I didn't take the ones off my car and line them up next to each other but I did jack the car up and peek underneath. Thanks in advance!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4501529974&ssPageName=STRK:MESE:IT

BTW, no reserve on the exchangers...

Posted by: qa1142 Nov 5 2004, 07:56 AM

They are for 1.7 or 1.8L. the 2.0L would be straight not curve up like these.

did I mention I won the FFC tech quiz?

Posted by: mudfoot76 Nov 5 2004, 08:15 AM

I had my hopes up for a second there...I've been looking for a set of 2.0L SS HE's. The day before FFC, I learned that my car was trying to kill me.

Thanks to my local fire department for letting me borrow a CO detector

Posted by: worktheweb Nov 5 2004, 09:00 AM

Thanks for the info. You're talking about the end that branches up to the engine, right? I swear these look just like the ones on my car. Oh well. Plenty of 1.7/1.8 owners seeking SS HEs, right?

Posted by: seanery Nov 5 2004, 09:00 AM

they are the same where they mount to the engine, it's where they mount to the muffler that is different.

Posted by: skline Nov 5 2004, 09:40 AM

I thought the pipe size was smaller on the 1.7/1.8 HE's?

Posted by: seanery Nov 5 2004, 09:40 AM

not for SSIs. Same size tubing, just different bends.

Posted by: skline Nov 5 2004, 09:45 AM

Well, if there is no size difference, you could just change your muffler too and you would be set. That is what I would do if I needed them.

Posted by: SLITS Nov 5 2004, 10:16 AM

it's to political to discuss that here - delete the thread!

Posted by: qa1142 Nov 5 2004, 10:35 AM

SLITS you sound like a jilted lover

These will fit any 914-4 - yes even a 2.0L

Need 1.7/1.8L muffler and bracket.

Posted by: SLITS Nov 5 2004, 10:46 AM

Geeeezzz, just having fun.................and you are correct about the HEs. The only consideration is that the flange pipe "diameter" is larger than the exhaust port outlet so you don't have a step in the wrong direction to impede flow.