Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Rear valance- painted or powder coated from factory?
Posted by: Hawk Dec 20 2012, 10:43 PM
I cant tell from the one Ive got and would like to redo per factory spec for dents and blemishes. Thx.
Posted by: tod914 Dec 20 2012, 11:55 PM
Pat Garvey has a thread on refinishing these. Might also be under rocker covers. He mentioned the early ones had a body shutz sprayed on, then topcoated with a satin black. Jeff Bowsby has literature on the factory black that was used if you care to source it. Mason? Hopefully they will chime in. I'm not 100% convinced the shutz was used 73+ cars. To me it seems like they were painted with grey primer, then thick paint applied. They do have a "texture" to them, but on the mid to later cars, it doesn't seem to be quite as pronouced. On the original cars I've seen, the inside is not painted, just left in primer. Hopefully that helps abit.
Posted by: Tom_T Dec 21 2012, 02:57 PM
Pat Garvey has a thread on refinishing these. Might also be under rocker covers. He mentioned the early ones had a body shutz sprayed on, then topcoated with a satin black. Jeff Bowsby has literature on the factory black that was used if you care to source it. Mason? Hopefully they will chime in. I'm not 100% convinced the shutz was used 73+ cars. To me it seems like they were painted with grey primer, then thick paint applied. They do have a "texture" to them, but on the mid to later cars, it doesn't seem to be quite as pronouced. On the original cars I've seen, the inside is not painted, just left in primer. Hopefully that helps abit.
... it's in the Originality & History ForumPowder coating wasn't done back then.
Posted by: Rand Dec 21 2012, 03:09 PM
Definitely not.
From my experience in the mountain biking world, powder coating started getting popular in the early 80s.
My question is: Will a judge notice and dock you for the difference between a powdercoated vs painted finish???
Posted by: tod914 Dec 21 2012, 03:13 PM
Rand, my 75 I had the valances and rocker covers pc'd in a raven black. Even had a slight texture to it. It was hard to distinguish from paint.
Posted by: Drums66 Dec 22 2012, 03:19 PM
Undercoating is another idea?..(front&back)Rhino-lining?
Posted by: Jeff Bowlsby Dec 22 2012, 03:34 PM
Undercoating is another idea?..(front&back)Rhino-lining?
Or you could wrap it in carbon fiber vinyl! Or paint it in that chrome spray paint! Or maybe mold some NACA ducts into it! Or apply a large letter S to it...
Pay no attention to that man behind the curtain...he is in a weird mood today...
Posted by: tod914 Dec 22 2012, 03:54 PM
Carbon fiber would make it lighter right?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)