Printable Version of Topic

Posted by: JRust Jan 31 2013, 02:57 PM

Okay I am heading up the prize drive for WCR 2013. I have allready gotten commitments from some of our member vendors. As always we will have some great prizes for WCR. We are always looking for more. So if you are a vendor trying to get your product out there. This is a great event to do it at. We give lot's of love to our vendors at the event & leading up to it. Not to mention after

Here is a list of prizes committed to at this point! Thanks to all our vendors for their great products

Eric at PMB Performance is donating a pair of 914 rear calipers

Mark at 914rubber is donating ton's of misc rubber & 1 factory second WAS tops

Chris at CFR (Chris Foley Racing) is donating a few misc pieces. They are sure to be awesome whatever they end up being

Dave (Sprinkle) is donating a few of his replacement TPS boards

Zach (Vacca Rabite) Is donating one of his custom made shift knobs

Tony (TC 914-8) is donating a few of his custom 914 beer bottle openers

Garold is donating one of Mom's Service Covers . An absolute must have item for every 914 owner. I use mine all the time

Carrie (A&P Girl) is donating one of her hardware kits

Craig at Camp914 is donating a few items yet to be determined also

Ethan 73-914kid Is donating one of his 4 lug "stud conversions kits"

Tod914 is donating some Throttle Body Gaskets

Rhodyguy is Donating a the 1/20 scale ninefourteen BANDAI model is nos in box with the parts still on the trees.

Jeff Bowlsby is donating a gift certificate for one of his Alternator wiring harness's. It could also be applied to on of his other harness's or MPS rebuilds

Rich (rdauenhauer) is donating a new set of his rear Drop link's for sway bars

If I have forgotten anyone please feel free to let me know. We are so thankful to our wonderful community & our member Vendors. We look forward to another great West Coast Ramble. I will add you to our growing list if you have something you'd like to donate. You do not have to be a vendor. If you just have something cool you'd like to pass on. We will gladly send it on to another member

Posted by: '73-914kid Jan 31 2013, 03:04 PM

I'll throw in a 4 lug stud conversion kit if youd like jaime. Yellow zinc and race studs

Posted by: JRust Jan 31 2013, 03:14 PM

Done & added! It's not until June. I'll send out reminders in April with shipping info

Posted by: tod914 Jan 31 2013, 04:22 PM

Shoot me a reminder when it's getting closer to the event, and I'll send you out some throttle body gaskets.

Posted by: JRust Jan 31 2013, 10:46 PM

Nice thanks

Posted by: JRust Apr 1 2013, 11:00 AM

Just a friendly bump! Never to late for more prizes. Things are looking great & WCR is coming up quick Make sure to check out our list above from all our great Vendors & members . The 914world is the best

Posted by: rhodyguy Apr 1 2013, 11:13 AM

the 1/20 scale ninefourteen BANDAI model is nos in box with the parts still on the trees.

Posted by: JRust May 7 2013, 09:54 AM

I picked up one of Mom's Service covers this weekend while I was in Indiana!
It was great to meet Garold & talk 914's. Alot of what we will all be doing at WCR!

Huge thanks to Garold & his mom for donating such a great prize . It's our great 914 community that make these event's so great. We truly appreciatte all the support from our vendors

Posted by: aircooledtechguy May 7 2013, 02:03 PM

I'll donate a framed print of an X-ray I shot of a Dellorto carburetor in a type4 manifold. Makes good desk/garage art.

Posted by: JRust May 7 2013, 05:16 PM

Awesome! You just going to bring it with you to WCR? That works great

Posted by: Mikey914 May 16 2013, 03:38 AM

Jamie or any of the vendors here that have donated, please PM me with the links you want to the WCR2013.info sponsor page.
Thanks

Posted by: montoya 73 2.0 May 19 2013, 08:35 PM

Posted by: Eric_Shea May 19 2013, 09:02 PM

Not sure where we stand... I probably received an e-mail or a PM but, way too many e-messages floating around in my world.

Count us in for a pair of these:

Posted by: Mikey914 May 19 2013, 10:04 PM

Vendor page is updated
http://wcr2013.info/Vendors___Links.html

Posted by: JRust May 20 2013, 02:28 PM

Perfect Mark! Thanks bud your doing a great job organizing everything. I this thread answered your questions on what vendors. If any more step up to the plate I will be sure to let you know

Posted by: biosurfer1 May 20 2013, 06:09 PM

Mark, you might want to update the text on the vendor page...looks like you copied it during April fools day and there are some, ahmm, errors

Posted by: Jeff Bowlsby May 20 2013, 10:58 PM

Don't forget about me! Here is my logo for the flyer.

Jamie, email me your emai address, I'll send you the gift certificate...

Attached image(s)

Posted by: montoya 73 2.0 Jun 4 2013, 09:29 PM

Posted by: TC 914-8 Jun 4 2013, 09:55 PM

I also Made 5 LED Tape style third brake lights for under the targa bar. The ones I made are 20" long as compaired to thie pict of my car w/ 30 " installed
There was a thread on it a while ago.

Posted by: rdauenhauer Jun 4 2013, 10:00 PM

Jamie, Mark & I talked shortly ago & I have a set of my *NEW* R. sway bar drop links I was going to contribute.

Seems it got lost in the shuffle.

R.

Posted by: Mikey914 Jun 5 2013, 01:56 AM

Got you both added.
Thanks,
Mark

Posted by: JRust Jun 5 2013, 01:55 PM

Does that mean you are doniting a few as prizes