Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Grinding off the front Hub centering ring
Posted by: bandjoey Feb 21 2013, 12:19 PM
Is it possible......
To use a normal angle grinder to cut off the centering ring? How hard is the metal?
Can it be done on the car? 
Posted by: brant Feb 21 2013, 12:25 PM
ouch...
why...
couldn't you have your wheels cut at a machine shop to fit onto a ringed hub?
Posted by: Tom_T Feb 21 2013, 12:40 PM
QUOTE(brant @ Feb 21 2013, 10:25 AM) 
ouch...
why...
couldn't you have your wheels cut at a machine shop to fit onto a ringed hub?
A much better solution is to have the back side of your wheels machined to accept the ring, as it's easier to R&R wheels/tires & change flats.
Machine like this pic....
.
Or get the proper wheels.
Posted by: Eric_Shea Feb 21 2013, 01:31 PM
It's easier to do it right.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)