Printable Version of Topic

Posted by: Obie Feb 21 2013, 04:46 PM

Evening all, Im new here. got this 74 914 from my brother trying to get it going..need a little help with wiring diagram for the hazard light..please help...thanx !!!!

Posted by: 914itis Feb 21 2013, 04:50 PM

Who's your brother?

Posted by: Obie Feb 21 2013, 04:53 PM

Not You!!!.. Thanx

Posted by: Cap'n Krusty Feb 21 2013, 05:26 PM

Factory wiring diagrams, in color, are available on the Pelican Parts website. '74 uses current flow diagrams rather than conventional wiring diagrams, but you could probably get away with using the '73 version.

The Cap'n

Posted by: Obie Feb 21 2013, 05:33 PM

I saw one from there, was really comfusing....

Posted by: kg6dxn Feb 21 2013, 10:26 PM

Here is the complete 74 diagram. Grounds are at the bottom. "E3" is the hazard switch. Just follow the wires to and from the switch. If you see a wire that stops with a # inside a yellow square, go to that number at the bottom of the page to find the other side of the wire (circuit).

Click on the picture to enlarge it.




Attached thumbnail(s)

Posted by: Spoke Feb 21 2013, 10:31 PM

Here's a simplified schematic of just the flasher circuit in 70-73 914. Hope this helps.


Attached image(s)

Posted by: Obie Feb 22 2013, 06:41 AM

Thnk you guys for yall help..ill try to work with this one.

Posted by: 914itis Feb 22 2013, 10:24 PM

Hi Scotti

Posted by: Obie Mar 1 2013, 04:47 AM

I'm Begining to feel that way..lol