I am having my cam reground next week, is there a popular lift and duration people like to use for a 2.0 with dual webber carb? (daily driver/ weekend toy)
Thanks,
You will probably be better with a new cam.
Re-grounding your used cam won't allow you to change the angles too much if at all.
Just pick up a WebCam 86 or 494 with new lifters. I ran the 494 for a long time and liked it.
-Aaron
Stu, of those choices, the 86a is best suited to your purpose IMO.
Its a good choice for theo as well.
494 is a street cam. Fairly mild. Hotter then stock, but still mild enough that it won't overpower CIS. I have had either a 494 or a Raby 9530 (494 with more duration) in my car forever.
Whatever cam you get make sure you get the matched lifters as well. VERY IMPORTANT. if you use a web cam, use web lifters.
Zach
Don't quess, go to Jake ,
Contact:
http://www.europeanmotorworks.com/vw/type-4-engine-parts
Or:
http://www.fatperformance.com/type4.htm
Unless you enjoy drama...
And love conflict....
Stu
Read this maybe?
http://www.tunacan.net/t4/tech/camshaft.htm
I have a brand new old stock, never used WebCam camshaft and lifter set, 00-263 and 00-152, Type 4 IV, 86 in their original boxes. It is made for carbs. $250 plus postage. LMK if interested. Joe
http://www.ebay.com/itm/Porsche-914-WebCam-camshaft-and-lifter-set-00-263-and-00-152-Type-4-IV-86-/230715411692?viewitem=&sspagename=ADME%3AL%3ALCA%3AMOTORS%3A1123&item=230715411692&vxp=mtr&nma=true&si=us8WCBw5L4KIVezJADC7jtPoGOo%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557[/url]
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)