I searched the old posts.
1) Ed Gilmore's system is still "in development" on his web page. It's been in development for almost eight years now. I'm not holding my breath.
2) There appears to be exactly one "here's what you need" kit available, from a company in Georgia. Hefty price tag -- $2,700 to $3,100 for a system. That seems AWFULLY high to me. Has anyone installed this kit? Any comments about it?
3) There is, of course, the "inverter and small home AC" option. But that isn't for me. No thanks.
Are there other options? The old posts mention cobbled-together systems that resulted in blown belts, bent bolts, and major oil leaks. I don't want any of that.
Heres a recent thread by Dlee6204
http://www.914world.com/bbs2/index.php?showtopic=192917&hl=
OT perhaps, but for those with sixes...
http://forums.pelicanparts.com/porsche-914-914-6-technical-forum/686904-914-6-c.html
Put the AC in the front trunk and the generator in the rear.
Nice LED tail lights too. Sleek.
So, I can pretty-much assume that nobody has purchased the $3,000 kit from you-know-who.
Like I said in my original post, $3,000 for an air conditioning kit seems way out of line to me. A Sanden compressor costs around $200. A condenser also costs around $200. The hardware and lines will cost around $100. So where is the other $2,500 going?
Development for a highly limited market. Looks like a proprietary set of vents too.
You could probably do something close with a vintage air kit, and a pully kit for the old a/c systems
Oldairproducts.com sells hot rod a/c kits that look like original units.
http://www.oldairproducts.com/catalog/underdash-ac-systems-400-series/old-air-products/ip-400hc/underdash-unit-inside-package-p-4487.html
Also. Has anyone looked into using an electrical compressor? Boats and RV and Euro cars use them all day long.
$3K is indeed pricey for a kit however its not completely absurd. When I first put together my system, I spent maybe $500 but I already had the evaporator unit and the condenser and I did all my own fabrication to mount the compressor and made my own lines. To build a system from scratch out of all new parts would easily be more than $1K in parts alone. This of course doesn't take into account the work necessary to put a system together and then install it.
I've thought about putting together a complete kit however its quite a bit of work and there's quite a few variables to consider. For instance not everyone wants to cut a hole in their front trunk for a condenser or cut their engine shelf for the compressor. IIRC, with the AA kit you have to do both. As of right now there's not one best way to add A/C to a 914.
So there's not much out there for a "kit" but my thread can help you decide on some of the different variables when someone puts together their own system. If cost is a big factor, the easiest and cheapest way to add A/C will be to buy a used 914 A/C system and update some of the key components.
The electric compressor is not really a good idea. Electric compressors on hybrid vehicles run at a much high voltage so not only would you need the compressor, but you would also need a custom inverter setup and a big ass alternator. Even if you could find a 12V electric compressor, you're still going to need a big alternator.
I googled Hot Rod Air Conditioning and came up with multiple companies. Here's an aritcle from Hot Rod Magazine:
http://www.hotrod.com/howto/hrdp_0706_air_conditioning/viewall.html
I see kits complete out there for $800-$1000.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)