I talked to Dave over at Triad West Performance the other day and my new muffler will be on its way for West coast to East coast So I thought I would take a few minutes to prepare for its arrival
Here is the old Monza begging to be removed. Note the valence has been pushed up and rolled to make clearance for the 4 tips
Attached thumbnail(s)
removed the Monza and made template for right side
Attached thumbnail(s)
With the list of power tools available to cut the space for the right tail pipe, plain old tin snips worked the best. I cut 1/2 inch from the line to leave room for the rolled lip. I rolled the edge with pliers and hammered it smooth. No grinding or filing needed
Attached thumbnail(s)
ready for Dave's shipment.
I may find the time to sand and paint the rear valence but for now.....
-Robert
Attached thumbnail(s)
i didn't know dave was now making exhausts for the 75-76 heat exchangers.
k
here are a few pics of the new triad muffler from Dave @ triadwest performance. Everything was packaged well and professionally and made the trip from coast to coast without issue ( evan a day early) Thanks for the extra effort Dave. Intallation only took 30 to 45 min. I triad (pun intended)to stretch the fun longer but it was a simple bolt on...
Attached thumbnail(s)
here is another pic and some links to video on youtube.
http://youtu.be/1lEXBFrMIL8
http://youtu.be/9O8cErJt1hE
http://youtu.be/cnhe2hJp0pA
Attached thumbnail(s)
Looks good, great job on the valance!
The 2nd and 3rd vids are how I remember my car sounding...good stuff.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)