Printable Version of Topic

Posted by: ChrisReale Nov 19 2004, 10:58 PM

Put a Terrycable clutch cable in today. Smooth as puppy poop. Definitly worth your time putting one in. My old cable was "unwinding" on me, and I had to adjust it everyother day. Figured I should change it before it snaps on me.

Posted by: Bleyseng Nov 19 2004, 11:01 PM

Cool, you cleaned and lubed the little wheel too, right?

Geoff

Posted by: ChrisReale Nov 19 2004, 11:05 PM

Yes. Boat Trailer bearing greae should do the trick....

Posted by: scott thacher Nov 19 2004, 11:21 PM

sorry stock cables for me i had 2 terrys snap, each in 5 k.

i found that the stock cables have a plastic ( maybe nylon ) sleave where they came out of the sleave you see in the engine compartment and the terrys did not both wore down at that point, no problems on my clutch tube. i think that the terrys are a bigger cable and dont fit down the cable tube as well. maybe my car just likes stock cables, but it sucks when they go on ya so stock cables only for me

Posted by: trekkor Nov 20 2004, 12:26 AM

I have both clutch and throttle Terry's

Nice products.

KT