I am replacing the brake fluid reservoir and everything down to a 19mm MC on my car. Do I use the 911 feedlines? The part numbers in PET listed for the 914 are real close to the '68-'73 911 feedline part numbers.
PCG-355-061-00 (911) vs PCG-355-061-10 (914)
PCG-355-063-00 (911) vs PCG-355-063-10 (914)
The 914 reservoir shares the 911 part number. I've replaced these on a '72 911, but I just don't remember if they look like the lines I pulled out of my 914.
What is the best way to do this with the parts that are available today?
TIA
Anyone know if they are the same?
I just hunted for a reservoir and the offers came out of the woodwork. If you are making everything new, forgot it...But if you just need to replace put a WTB ad out there and get about $5 ready to spend. At least that is what I was offered with the res.
If the numbers are not identical, then they are NOT the same. Probably the length is different; as to which one is longer?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)