Printable Version of Topic

Posted by: McMark Jul 11 2013, 12:46 PM

Got an update on my first electronic product. It's been in the works for 6 mo or so. I built a proof-of-concept unit first. This is the first 'production' unit that I'll be testing.

I think it's going to be an electronic HP generator, but feel free to guess.


Attached thumbnail(s)

Posted by: Mblizzard Jul 11 2013, 12:49 PM

FI related?

Posted by: worn Jul 11 2013, 12:51 PM

Well, I am curious. Are there traces on the back? Why are some holes surrounded by square plating and others by circle? I like doing this stuff, but don't know a lot about it. I made the A/F project on the Pelican board but never installed it. I hope it electronically boosts HP.

Has any one any experience with retard advance units that you dial from the passenger space btw?

Posted by: balljoint Jul 11 2013, 01:24 PM

Saw your post with the yard stick for scale on Facebook.

I can't even figure out where it would fit in my car!?!

Posted by: bulitt Jul 11 2013, 01:33 PM

Pin selector for checking cylinder data

Posted by: timothy_nd28 Jul 11 2013, 01:35 PM

Dip switch array for a sim box or different speeds on a vibrator?

Posted by: stugray Jul 11 2013, 01:40 PM

Either a conversion kit for LED lighting, or a microsquirt interface board?

Stu

Posted by: ConeDodger Jul 11 2013, 01:43 PM

I suspect this will be used on my 240Z after I go to aftermarket EFI and ITB's...

Posted by: SLKWrx Jul 11 2013, 02:17 PM

I know.. electronic turbo for a 1.7! This is just the foundation to bolt it to.

Posted by: mskala Jul 11 2013, 02:29 PM

I've seen and designed a bunch of circuit boards, and I can say without a doubt
that that is a circuit board.

Since there doesn't appear to be any electronics there, what you got is basically
a hole-mover.

Posted by: r_towle Jul 11 2013, 02:41 PM

relay board

Posted by: sixnotfour Jul 11 2013, 02:43 PM

nope there is only 4 ,,,it should have 6 though

Posted by: McMark Jul 11 2013, 03:07 PM

Can I play too?

Cheese grater.

One astute Facebooker already guessed it.

Posted by: Woody Jul 11 2013, 03:13 PM

Posted by: MDG Jul 11 2013, 04:21 PM

Cribbage board?

Posted by: zambezi Jul 11 2013, 04:34 PM

Well I see the 4 cylinder firing order on the left side.

Posted by: 904svo Jul 11 2013, 05:12 PM

Its a 10 segment led read out board with bcd inputs.

Posted by: bulitt Jul 11 2013, 06:27 PM

I don't have a clue, but you have some cool stuff going on as shown in your FB page. Do you have a finished pic of Andy's front hood?

Posted by: struckn Jul 11 2013, 06:44 PM

Warp Drive Fibulator with a flux generator surge deflector. Looks similar to the one used on the SR71 Blackbird but that's classified TS.

Posted by: bfrymire Jul 11 2013, 06:51 PM

Looks like a breakout board. Since there appears to be four outputs, it's either for individual coils or injector drivers.

--brett

Posted by: 76-914 Jul 11 2013, 07:27 PM

path translator for the turboencabulater?

Posted by: JRust Jul 11 2013, 07:59 PM

A new fangled cribbage board

Posted by: Krieger Jul 11 2013, 07:59 PM

Next generation game board for "Battleship"? Please say yes.

Posted by: Krieger Jul 11 2013, 08:07 PM

What is that Merkel scale your using?

Posted by: JamesM Jul 11 2013, 10:11 PM

Continuum Transfunctioner?

Posted by: McMark Jul 11 2013, 10:19 PM

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Posted by: Cupomeat Jul 12 2013, 06:17 AM

I thought you can't turboencabulate a 914?

Posted by: balljoint Jul 12 2013, 10:30 AM

It's a meter stick. Like a yard stick, but not.

Posted by: stugray Jul 12 2013, 11:32 AM

You can but you need to anneal the pre-famulated amulite to keep it from delaminating from the logarithmic casing. This would result in depolarization of the odd numbered marzelvanes and could, in turn, affect the alignment between the waneshaft & the fam.

Other than that, not much harder than a turbo.

Stu

Posted by: blitZ Jul 12 2013, 12:18 PM

Meh, I already have one.

Posted by: worn Jul 12 2013, 12:22 PM

I wanna know!! Tell us!!

Posted by: jgara962 Jul 12 2013, 04:55 PM

How long are you going to make us wait?

Posted by: DBCooper Jul 12 2013, 05:02 PM

He's messin' with ya, it's just something random he found at a garage sale.

Posted by: Spoke Jul 12 2013, 05:14 PM

Miniature Relay board?

Posted by: OCD Performance Jul 12 2013, 05:33 PM

Come on guys,

Its for the turbo encabulator.

this video will explian it all...


http://www.youtube.com/watch?v=rLDgQg6bq7o


Cheers

Mike

Posted by: Dave_Darling Jul 12 2013, 06:23 PM

"I tol' him we already got one!"

--DD

Posted by: Mark Henry Jul 12 2013, 09:29 PM

Butt plug.

https://www.youtube.com/watch?v=cUhtv2XOolU