Got some Hoosiers
Looking forward to scuffing 'em up a bit before I drop the FOUR.
KT
Attached image(s)
SO3s.....R or A?
JP, I got the R's.
Just one driver heat cycle and the factory heat cycle. Like new!
The Rs are not bad. I ran a set last year (2003) and figure I put somewhere around 200 passes & some track work on em' ....and they still have the circumferential lines on em'. This year's As have around 150 and are more worn than the Rs....they also flat spot more easily. Both liked -2 camber.
Our shitboxes are easy on tires.
This ones for Andy
It's a schlick...it is, it is!
KT
Attached image(s)
JP, I'm at -1.8 neg camber.
KT
These "Western" wheels backspace is close...4.5".
They are fairly light and very cheap to me.
I'll roll the fenders a little more.
KT
Attached image(s)
I'm heading over to Sears right now to fit the tire/wheel combo on the car.
Posible roll
KT
JP,
I'll be interested to see how many passes you get out to the slicks. I got 64 between me and my wife. Of course....I beat the dogs%$t out of mine. I'm not easy on tires....
Bill P.
I'm easy on tires. Never let em' slide.......humm, maybe that's why I'm so damn slow
I will report back......in bout 8 months. Please stand by....
JP, It'll be great to see you run in March at the all 914 a/x.
Got the set of wheel for the tires.
Made a deal with a guy. I bullnose his marble tiles, he gives me wheels and a lightened and balanced SIX pressure plate.
KT
When is this all 914 auto-x?
I must have missed the thread during one of my bidness trips....
When and where is it?
Thanks,
Bill P.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)