I am missing two fusses, and also have a few non stock ones in there that I don't know the rating of. Can someone please show me a picture with the stock colored fusses in there.
Thanks
Attached thumbnail(s)
Don't you still have the fuse panel picture you took?
I'll grab a photo of the fuse values and post it up for you.
From left to right is...:
white, white, white, white, white, white, white, blue, white, white, white, blue.
white fuses are 8 amp, and the blue ones are 25 amp
What year is your 914? From 1974 on they use 16 amp fuses in the spaces where 25 amp fuses go.
'71 as per his signature
This is basic information that is included in most manuals
Along with a lot of other useful info. Buy your self a haynes
manual.
Its not in the manuals - but Pelican has the correct fuses in their electrical tech references section.
I had copied this from another post but I can't remember who to give credit for it.
Which fuse does what?
Left to right, the fuses are numbered.
1 Left high beam
2 Right high beam
3 Left low beam
4 Right low beam
5 Left parking/running lights
6 Right parking/running lights
7 Taillights (including license plate lights)
8 Brake lights, horn, wipers, lighter
9 Power to gauges and G light (charging system), turn signals
10 Fog lights (if fitted)
11 Hazard lights
12 Headlight motors
Fuses 8 and 12 are 25A, the rest are 8A. In later years, they dropped to 16A fuses for 8 and 12, and raised 10 to 16A, too.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)