I have a 74 914 and not sure if it has the original engine or not can sombody help me figure this out
The 2L engine # is stamped in front of the oil filler.
Plug location says not 2L. Your # will
be stamped at the case centerline at the rear, on a
raised boss , passenger side.
I think it is 4 but the vin number I cant get anthing from it for some reasonp
4 would be the first # of the vin. 4 means 74.
the engine # is, like Andy said, just below the fuel filter
on your pic. It will start with 2 letters.
The configuration is early 1.7. No PCV, heater blower on the engine, plugs set high, no vents in the heads. The engine number should be on that little diagonal spot visible by the fuel filter. That fuel line running directly into the plenum's a nice touch. Don't have to waste too much time and effort getting the jetting right. Mileage probably isn't too much worse than the single carb gives you ................
1.7 -- and not a 73, I think.
--DD
The werd thing is the vin on the motor dont start with any letter I tryed looking it is like 0033 somthing thats what is confusing me
This is the first part of the vin maby this will help
Attached thumbnail(s)
"W" is a letter... Early 1.7.
--DD
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)