Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ power for add on gauges

Posted by: Mike D. Aug 10 2013, 12:49 PM

since I've added the type 4 engine to my vw fastback I want to add some 914 gauges. Can I use always on power for the gauge power? I'm adding a tachometer, oil pressure gauge, oil temperature gauge.

Posted by: sportlicherFahrer Aug 10 2013, 01:54 PM

If you use a constant power source you will most likely just drain your battery. Should be able to use a test light and see what fuses have key on power and branch off of one of those, and/or try for a relay method so the draw on the fuse is only to drive the relay and not the gauges.

Posted by: mrholland2 Aug 10 2013, 04:28 PM

Do you mean ALWAYS on? Or always on when the ignition is on? The answer to the first is no, the answer to the second is yes.

QUOTE(Mike D. @ Aug 10 2013, 11:49 AM) *

since I've added the type 4 engine to my vw fastback I want to add some 914 gauges. Can I use always on power for the gauge power? I'm adding a tachometer, oil pressure gauge, oil temperature gauge.


Posted by: Mike D. Aug 10 2013, 09:36 PM

I pretty much knew the answer. But I had perfectly good clock power sitting there and no more room in the fuse box. I made room and have switched on power.
Thanks

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)