I have no spark in my 3.2. I have replaced the ECU, the DME relay and now I think I am down to a wire between the DME and the coil or the coil itself. I have a multimeter, but I don't know how to check the coil. Can I just check for a certain resistance between the two posts? Also, if I ground the black end of my meter and put it in voltage mode, and put the red lead on each of the posts on the coil, shouldn't I get 12v to one of the posts when I am cranking the starter?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)